OMEGA探頭質量應變片有多種模式可供選擇，以滿足大多數探頭設計要求。其堅固的結構、可靠性和靈活性使其適用于高精度靜態和動態傳感器。測量網格由特殊配方的蝕刻康銅箔形成，然后將其完全密封在由聚酰亞胺薄膜組成的載體介質中，以確保長期可靠性。

OMEGA應變片訂貨信息：

引線 未顯示	型號(5件裝)	NOM. RESIS- TANCE(Ω)	尺寸mm(inch)?				Max V* (Vrms)	TERMINATION	TEMP COMP
			grid		carrier
			A	B	C	D
尺寸5.5mm	SGT-2/350-DY11	350	2.0	2.0	5.5	5.9	6.5	Ribbon Leads	ST
	SGT-2/350-DY13	350	(0.079)	(0.079)	(0.217)	(0.232)	9.5	Ribbon Leads	AL
	SGT-2/350-DY41	350	Miniature, parallel dual grid pattern, bending strain 350 Ω				6.5	Solder Pads	ST
	SGT-2/350-DY43	350					9.5	Solder Pads	AL
尺寸6.1mm	SGT-2C/350-DY11	350	1.9	2.5	6.1	6.4	7	Ribbon Leads	ST
	SGT-2C/350-DY13	350	(0.075)	(0.098)	(0.24)	(0.252)	10	Ribbon Leads	AL
	SGT-2C/350-DY41	350	Small, parallel dual grid pattern, bending strain 350 Ω				7	Solder Pads	ST
	SGT-2C/350-DY43	350					10	Solder Pads	AL
尺寸7mm	SGT-3N/350-DY11	350	3.2	2.5	7.0	6.9	9	Ribbon Leads	ST
	SGT-3N/350-DY13	350	(0.126)	(0.098)	(0.276)	(0.272)	13	Ribbon Leads	AL
	SGT-3N/350-DY41	350	Medium, parallel dual grid pattern, bending strain 350 Ω				9	Solder Pads	ST
	SGT-3N/350-DY43	350					13	Solder Pads	AL
尺寸6mm	SGT-3/350-DY11	350	3.0	1.6	6.0	4.1	7.5	Ribbon Leads	ST
	SGT-3/350-DY13	350	(0.118)	(0.063)	(0.236)	(0.161)	10	Ribbon Leads	AL
	SGT-3/350-DY41	350	Medium, parallel dual grid pattern, bending strain, grid narrow 350 Ω				7.5	Solder Pads	ST
	SGT-3/350-DY43	350					10	Solder Pads	AL
尺寸10mm	SGT-6/350-DY11	350	6.3	2.5	10.0	7.0	13	Ribbon Leads	ST
	SGT-6/350-DY13	350	(0.248)	(0.098)	(0.394)	(0.276)	18	Ribbon Leads	AL
	SGT-6/350-DY41	350	Medium, parallel dual pattern, grid narrow 350 Ω				13	Solder Pads	ST
	SGT-6/350-DY43	350					18	Solder Pads	AL
尺寸11.8mm	SGT-7/350-DY11	350	6.5	3.6	11.8	9.7	15	Ribbon Leads	ST
	SGT-7/350-DY13	350	(0.256)	(0.142)	(0.465)	(0.382)	20	Ribbon Leads	AL
	SGT-7/350-DY41	350	Large, parallel dual pattern 350 Ω				15	Solder Pads	ST
	SGT-7/350-DY43	350					20	Solder Pads	AL
尺寸11.8mm	SGT-7/1000-DY11	1000	6.5	3.6	11.8	9.7	27	Ribbon Leads	ST
	SGT-7/1000-DY13	1000	(0.256)	(0.142)	(0.465)	(0.382)	40	Ribbon Leads	AL
	SGT-7/1000-DY41	1000	Large, parallel dual pattern, bending strain, higher resistance, reduced heat generation 1000 Ω				27	Solder Pads	ST
	SGT-7/1000-DY43	1000					40	Solder Pads	AL
尺寸7mm	SGT-2D/350-DY11	350	1.5	0.7	7.0	3.0	5.5	Ribbon Leads	ST
	SGT-2D/350-DY13	350	(0.059)	(0.067)	(0.276)	(0.118)	7.5	Ribbon Leads	AL
	SGT-2D/350-DY41	350	Dual-element pattern for narrow bending beams Centerline spacing 2 mm (0.079") 350 Ω				5.5	Solder Pads	ST
	SGT-2D/350-DY43	350					7.5	Solder Pads	AL

ST=Steel

AL=Aluminum

?尺寸可定制！

*至大允許電橋通電電壓(Vrms)

注意：有關應變計附件另售!

典型應變片安裝